Five Things Everybody Does Wrong About Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs

Are your uPVC window or door mechanism not working properly? Maybe the handles on your uPVC windows and doors aren't aligned properly or are difficult to operate.

You'll be wasting energy if your double-glazed doors don't perform as they should. This increases the likelihood of burglaries. Owen the Locksmith can fix your door lock at an affordable cost.

Snapped Key

It can be a hassle when a key is snapped inside the lock. This can also be a security risk because it could leave you vulnerable to a burglar if the door does not lock. There are fortunately quick fixes that you can use to solve the issue and get your door functioning properly once more.

Be calm. If you panic and begin poking around wildly you may end up pushing the damaged piece of the key even further into the lock, thereby making the situation much worse.

Spray WD-40, or another penetrating oil, into the lock. This will assist the broken piece to come out more easily. You can also use a screwdriver to break any pieces stuck. If you happen to have a little bit of the key left hanging out it, you can make use of a paperclip or other thin metal object to grab it and remove it. Both methods work, but you must be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges that can work in a pinch to extract hooks and some Jigsaw blades can also be used for this function. If you don't have any of these items, you can bend a hook with needle-nosed pliers. Finally, you can make use of a pair of tweezers to grasp and pull out the last bit of the broken keys.

If you can't get the broken piece of key out, try using a lock de-icer. It's available at most hardware stores and works by freezing any moisture present inside the lock.

If none of these strategies appear to be working, it might be time to call locksmith. Fitlocks experts can fix issues such as broken handles or snapped keys with uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms so that they are more easy to use. Get a double glazing repair with us online, or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder can pose a major security risk. A professional locksmith is able to fix the cylinder. Locksmiths will need to tap the cylinder to fix it. This can be done using a hammer, or any other tool. However, the most effective method is to use a wire or a long match. Then, place  window repair Guildford  of the match or wire near the keyway. The locksmith will strike the lock to crack it open. This is better than using a hammer, which can harm the lock.

The most frequent cause for cracks in the head of a cylinder is due to overheating. This can happen when the block and cylinder head are made from different metals like cast-iron and aluminium. Different metals can be heated and cool at different rates. This can cause localised hotspots to expand more quickly than the rest.

Corrosion is a different reason for fractures in cylinders. If the head and block of a cylinder are not maintained properly they may corrosion or rust, which can cause them to expand faster than anticipated. This can cause cracks as time passes.

If your uPVC window or door lock is brittle or requires lots of pressure to turn, this can be the result of many things. This can be caused by a faulty locking mechanism or misalignment, as well as a worn-out handle.

This is a straightforward and cost-effective fix that a majority of double glazing owners can accomplish. A professional locksmith will typically be able to solve the issue within an hour of arriving at your home. They can replace the locking mechanisms, or replace the window handles and replace the gearboxes, depending on your specific needs. A skilled locksmith will always be able to provide you with a recommendation of the most cost-effective option for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders that give you an extra layer of protection against burglars. It's a small price to pay for the peace of mind that comes from knowing your uPVC doors are safe.

Broken Handle

It's not surprising that window handle locks may break. They have complex mechanisms that become less effective over time. It isn't always easy to pinpoint the cause of the problem and then fix it properly.

Repairing your damaged handle, regardless of whether it's the internal latch or the locking mechanism will increase the security of your uPVC door and reduce the risk of draughts. If you do not repair or replace your handle can be very expensive and can harm the door's frame as well as lock, so it's worth taking some time to make sure you do it right.

With the window in the open position and the window open, loosen the screw that secures the handle by using the screwdriver. The screw should be on the inside of the backplate, which is usually covered by a screw cap to enhance the appearance. Be sure not to damage any of the internal parts within the handle, such as the plates or levers on the opposite side of the spindle. It is best to keep them in the same order so that you can replace them when needed.

Then, with a second screwdriver loosen the screw that connects the handle to the spindle on the back. Once this is released, you'll be in a position to pull the handle away and pull out the broken spindle. Replace it with a brand new one, ensuring it's the same size as the previous one (you will typically find them online or in hardware stores) and securely screw it into the right place. Be careful not to overtighten because this could damage the handle or the window frame.

Make sure the new handle is fitted after which you can close and test the handle. It should operate smoothly and you'll be able to open your window once again.

While you're working on the handle, make sure to ensure that your uPVC windows are closing properly. If they're not then you may experience draughts and damp in your home, as well as compromising your home's energy efficiency. Core Sash Windows is a local window company that can alter the hinges on your window frames to ensure that they shut properly.

Broken Spindle

It is more typical for the spindle to break than the handle. This is most common in uPVC tilt-and-turn windows. These types of windows require a handle which acts as a locking mechanism within the window frame. The handle is attached to a central rod that activates a series of mushroom-shaped locking cams that secure into the frame of the window keep. If the dead latch mechanism does not open when the handle is turned, it is possible that the spindle has been damaged and this could be a very frustrating issue.

There are solutions to this issue. A good locksmith can quickly and efficiently fix this problem. They will be able to disassemble the window handle by using a tool to remove the wheel portion of the mechanism where the spindle goes. This can be done without damage to the handle or the window frame.

After removing the wheel the technician will inspect the spindle to determine the cause of the break. This involves disassembling the spindle and inspecting every component, observing any damage or excessive wear. The process is performed in a clean room by highly skilled technicians.

The next step is to clean the damaged spindle, this will remove any dirt or other debris that could be hindering its normal operation. The spindle could be replaced or repaired. If the technician is replacing the spindle the dowel can be used that is the same size to the original. He will then drill matching holes into both pieces. This will ensure that the new spindle has an exact fit with the handle.

If the spindle that is damaged is beyond repair, it may be required to replace it completely. Home centres sell generic substitutes, but if your window design is unusual you'll need to contact an expert in cabinet making or woodworking who can replicate the exact piece. After the spindle is installed, it is attached to the handle. Line up the screw holes on the handle with the existing screws in the frame. Once the new handle is installed, you are now ready to operate your uPVC window.